Tama Star Boom Cymbal Stand
Welcome to The Most Advanced Cymbal Stand On the Market - The Tama HC103BW Star Boom Cymbal Stand
Tama understands that a drummer has more important things to worry about during a gig than their boom stand. That's why they designed Tama Star series stands to take care of your every concern when it comes to drum hardware. Engineered to put your cymbals right where you need them, Tama's hybrid joint fittings combine all the advantages of metal fittings with the smooth action of nylon to give you exact placement and rugged stability. The STAR series stands are constructed with Tama's True-Sound Insulation Mute - so more of your sound makes it into the mix instead of being absorbed by the stand, letting the tone of your cymbals ring true. Contact the Drum Center of Portsmouth for all of your Tama hardware needs!
Quick-Set Cymbal Mate:
By simply gripping and pressing the two buttons on the both sides, users can attach and remove the Cymbal Mate with just one touch, making cymbals setup/breakdown a snap. Like our standard Cymbal Mate: fine adjustments to the cymbal's swinging motion can be made by rotating the unit.
Ring-True Cymbal Felt
With a partially hollowed inner section, our new cymbal felts offer minimum contact while maximizing the natural resonance of the cymbal. The felts are same diameter and therefore offer the same support as a traditional felt.
True-Sound Insulation Mute
It's widely known that the vibrations of a cymbal or tom will transfer to the stand, causing the natural sound to be partially absorbed by the pipe. To maximize isolation and bring out the true sound of cymbals and toms, an inner pipe mute is equipped on the top pipe of all STAR series stands.
Glide-Tite Grip Joint
Our new Glide-Tite Grip Joint allows for a more secure attachment by using a metal-to-metal contact point. This provides an extremely solid anchor and complete isolation for a tom or cymbal. Because the stand does not move with the instrument, the natural resonance of that instrument is maximized.
Orbital Quick-Tite Boom Tilter
This new boom arm tilter allows for extremely easy and quick adjustment of the cymbal position. With only one wing nut, you can adjust the angle, length, and orientation of the boom arm in all directions. Eight metal discs secure the boom arm in place.
Orbital Quick-Tite Cymbal Tilter
This all new cymbal tilter allows for gearless angle adjustment of the cymbal in all directions. The friction of six metal disc plates gives ample stability. In addition, this L-rod allows extension of the cymbal's length/reach without having to change the angle or height of the cymbal or boom arm.
|Hardware Type||Cymbal Stands|